Unit_logo.gif (15662 bytes)

Unit-Pump: Distributor of the year
This year the SALVATORE ROBUSCHI award for the best reseller goes to UNIT-PUMP A/S,
exclusive distributor in Denmark.

RBB 250-35
Salv. Robuschi pump RBB 250-35 complete with 45 kW ABB NEMA motor,
ready for delivery for the US market.

2 Nova Rotors cavity pumps with auger feed screw type JH160K2 30 kW,
delivered to a Nordic fish factory by UNIT-PUMP.

For pumping fish waste 65 m3/h x 8-10 bar at 175 rpm.

Grinding of 42 tons/h fish on Franklin Miller Grinder Taskmaster TM 2342A from UNIT-PUMP,
at a Fishmeal factory in Denmark

2020 - December
Haarslev Industries celebrated delivery of pump no. 2,000 from Unit-pump
Today, Haarslev Industries celebrated delivery of pump no. 2,000 from Unit-pump.
The cooperation between Haarslev and Unit-pump goes back more than 20 years
where Haarslev has sourced Centrifugal pumps, Progressive cavity pumps,
Vacuum pumps and Disc-flo pumps. This particular pump is a heavy duty centrifugal pump from Robuschi
- known for its ruggedness and low NPSH value which makes this type of pumps ideal for applications
such as Haarslev Waste heat Evaporators. Haarslev Evaporators are used extensively in animal and fish protein
applications all over the world to recover valuable proteins from process water.

2020 - July
Grinder system for Sanki, Japan
Photo of the pre-assembled redundant TM2370 grinder system for Sanki-Shiro, Tokyo. The plant collects and process the fish waste
from almost all fish markets and restaurants in Greater Tokyo area, and with 30 million sushi lovers this adds up to about 800 tonne
fish waste per day consisting of anything from large tuna heads to guts from tiny fish species. Consistent grinding and feeding of raw
material with optimum particle size are extremely critical, therefore redundant 50 kW heavy duty grinders type Franklin Miller TM2370,
delivered by UNIT-PUMP, Denmark, will be installed. For transport of the raw material to the cooker, redundant LAP400 lamella pumps from
JS Proputec have been chosen.

Fjell Technology Group has carefully designed the complex system to be tied in between existing machinery and building structures in the
already densely packed plant. This week the complete system was pre-assembled at the premises of JS Proputec A/S in Hjørring before it will
be carefully packed in three 40' containers for shipment to Japan and installation and commissioning later this autumn.

On the picture:

Torben Petersen (left), CEO of Unit-Pump, Asbjørn Strand (centre), CTO of Fjell Technology Group, and Anders Madsen (right), CEO of JS Proputech